The rear sections of instruments and equipment with short length (patch panel, horizontal organizer, etc.) remain completely unoccupied at certain U heights, and lead to waste of space. In GT series cabinets, on the other hand, it is possible to install accessories and equipment with higher length from side panels at the cabinets with U values where equipment with short length are installed. Thanks to this arrangement, the internal capacity of the cabinet might be used with 100% efficiency.
Thanks to its (19”)³ feature, it is possible to install instruments and equipment to the GT series cabinets with U values higher than their height. For example, while it is possible to install only the 42U instruments to a standard cabinet with 42U height, a GT series 42U cabinet might accommodate 100U instruments and equipment. Thanks to this feature, a unique and unrivaled cost advantage is achieved.
9” SIDE BRACKETS
It is possible to install all kinds of 19” instruments, accessories and fan modules vertically to the sides of the cabinet by attaching the brackets, which are installed into the cabinet in depth, are attached successively with certain intervals. Thanks to the side rail accessory attachable to such brackets, it is further possible to install all kinds of 19” instruments, accessories and fan modules horizontally to the sides of the cabinet.
|Additional brackets and side rails might be requested and installed to the cabinet with ease during and after the order depending on your needs. The cabinet is capable of meeting all installation needs as the brackets and rails can be attached to the sides of the cabinet at any desired location (with certain intervals) in any desired quantity.|
|UNLIMITED CONNECTION TERMINALS|
|19” fan modules can be installed at any desired location at the top, bottom and sides of the cabinet, thus enabling ventilation of the desired spot of the intended instrument with fan module of adequate capacity.|
|Maximum active ventilation is possible at all depths by installing maximum 6 fan modules at top, side and bottom sections of the D=600 cabinets,|
|maximum 8 fan modules at top, side and bottom sections of the D=800 cabinets and,|
|maximum 12 fan modules at top, side and bottom sections of the D=1000 cabinets.|